HobbyKing
TURNIGY NANO-TECH 3300MAH 10S 65~130C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance! Turnigy Nano-Tech High discharge batteries & deliver full capacity as well as being the best value batteries in the hobby market today!Spec.Capacity: 3300mAhVoltage: 10S1P / 10 Cell / 37.0VDischarge: 65C Constant / 130C BurstWeight: 1020g (including wire, plug & case)Dimensions: 265 x 44 x 42mmBalance Plug: JST-XHDischarge Plug: 4mm Bullet-connector *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load d,
HobbyKing
TURNIGY NANO-TECH 3300MAH 6S 65~130C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 3300mAhVoltage: 6S1P / 6 Cell / 22.2VDischarge: 65C Constant / 130C BurstWeight: 595g (including wire, plug & case)Dimensions: 134 x 44x 49mmBalance Plug: JST-XHDischarge Plug: HXT-4mm *The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy discharge. More than 90% at 100% C rate.-Fast charge ,
5 Reviews
Hobby-Lobby
EASYSTAR RTF ELECTRIC PARKFLYER
Exactly the same airplane as MPX4192 EasyStar, but with everything installed so that it's ready to fly (after you charge it up and attach the wing). 54" wingspan, 35" long, 370 sq. in. wing area, 24 oz. flying weight, 9.4 oz./sq. ft. wing loading. EasyStar has unusually stable flight that's perfect for beginners. It's somewhere between a sailplane (it will thermal) and a sport rc plane. It's very easy to handlaunch and fly. (We have video of a pilot handlaunching EasyStar but NOT holding the transmitter! EasyStar climbs right out - straight.) Beginner's hard landings hardly hurt it because it's made of resilient and repairable "Elapor" foam. Even after many crashes during the learning process, Easy Star will be ready for more where other trainers would be ready for the trash can. The motor and prop are mounted on top so hard landings won't break the prop. For 3 channel control: Rudder, Elevator, Motor control., Technical Specifications:, Length:, 35", Wingspan:, 54", Flying Weight:, 24 oz., Controls:, Elevator, Rudder, Throttle, Wing Area:, 370 sq. in.,
The beginner's RC airplane that can fly itself in a ...Hobby-Lobby
MINI ULTRA STICK
| Wingspan | 38.75 in (985mm) |
| Overall Length | 34 in (865mm) |
| Prop Size | 10x7 - 11x7 |
| Hardware Included | Yes |
| Speed Control | 20A Brushless |
| Flaps | Yes (optional) |
| Approx. Flying Duration | 10-20 minutes |
| Scale | Park Flyer |
| Approx. Assembly Time | 1-2 hours |
| 6.5 | 1 when using Park 400 Brushless Inrunner |
Mini Ultra Stick ARF Features:, Perfect transitional airplane for advancing pilots who want to learn aerobatics and for sport flyers who want easy comfortable sport flyer, Needed to Complete:, Brushless Motor, Brushless ESC, 4+ Ch Radio, 4 Sub-micro Servos, Servo Extensions & Y-harness, 4 to 6-Ch Receiver, LiPo Battery, LiPo Charger, CA, Propeller, Technical Specifications:, Mini Ultra Stick ARF Specs:, Wing Area:, 325 sq in (21 sq dm), Flying Weight:, 22 - 25 oz (625 - 710g), Motor Size:, Park 400 Inrunner or Park 450 Outrunner, Radio:, 4-channel or greater (7-channel for quad flaps), Servos:, 4 sub-micros (6 sub-micros for quad flaps), Trim Scheme Colors:, UltraCote Fluourescent Blue, Flame Red, Transparent Red & White, CG (center of gravity):, 2.50 in (63mm) behind the leading edge, Recommended Battery:, 2100 mAh 3-Cell 11.1V Li-Po, Control Throw (Ailerons):, 1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate, Control Throw (Elevator):, 9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate, Control Throw (Rudder):, 7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate, Gear Ratio:,
Extremely Versatile and An Absolute Blast to Fly Based on ...Hobby-Lobby
ULTRA MICRO F4U CORSAIR BNF (OVERSIZE)
| Wingspan | 15.9 in (405mm) |
| Overall Length | 12.8 in (326mm) |
| Flying Weight | 1.47oz (41.8g) |
| Servos | AS2000L (included) |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Throttle | Yes |
| Scale | Ultra Micro |
| Steering | Yes |
| Experience Level | Intermediate |
Ultra Micro F4U Corsair BNF Highlights:, Comes with two decal sets from which to choose - WWII's more famous Corsair pilots, Ira "Ike" Kepford of the famed "Jolly Rogers" and Greg "Pappy" Boyington from the "Black Sheep Squadron", Ultra Micro F4U Corsair BNF Specs:, Wing Area:, 48.7 sq in (314 sq cm), Motor Size:, 8.5mm Coreless Brushed motor, Radio:, 4+ Channel DSM2 Transmitter required, Recommended Battery:, 150mAh 1S 3.7V LiPo battery (included), Flaps:No, Retracts:No, Charger:, 3.7V LiPo Charger (included), Is Assembly Required:No, Needed to Complete:, 4+ channel DSM2 compatible transmitter is all you will need.,
ParkZone's first Ultra Micro Series F4U Corsair It was an ...Hobby-Lobby
T-28 TROJAN PNP (OVERSIZE)
44" wingspan, 36" long, 30 oz. flying weight. You can pilot an electric scale replica of this historical warbird. Equipped with an outrunner brushless motor, ParkZone's T-28 Trojan is a powerful, high performance aircraft. The Trojan is perfect for the experienced pilot who would rather spend his time flying a mighty scale replica than building one. Add a receiver and a 3 cell 1800 mAh lipoly battery and you're ready to fly. The Plug-N-Play version of the T-28 Trojan offers the convenience of a Ready-To-Fly and the versatility of an Almost-Ready-to-Fly - just plug in your receiver and fly! You can fly the T-28 Trojan using any major brand of receiver and transmitter. Simply attach a propeller and plug in a receiver of four channels or more, and it's ready for action. Features: Steerable nose gear and fixed main landing gear allows for smooth takeoffs and landings, 960 Kv outrunner brushless power system, E-Flite 30A brushless speed control, Durable Z-Foam construction, Authentic paint scheme, decals and pilot figure, Ready to fly version also available (PKZ4400)., Technical Specifications:, Length:, 36", Wingspan:, 44", Flying Weight:, 30 oz., Controls:, Aileron, Elevator, Rudder, Throttle,
Durable Z-Foam construction - A blast to fly!Hobby-Lobby
EASYSTAR RTF ELECTRIC PARKFLYER
Exactly the same airplane as MPX4192 EasyStar, but with everything installed so that it's ready to fly (after you charge it up and attach the wing). 54" wingspan, 35" long, 370 sq. in. wing area, 24 oz. flying weight, 9.4 oz./sq. ft. wing loading. EasyStar has unusually stable flight that's perfect for beginners. It's somewhere between a sailplane (it will thermal) and a sport rc plane. It's very easy to handlaunch and fly. (We have video of a pilot handlaunching EasyStar but NOT holding the transmitter! EasyStar climbs right out - straight.) Beginner's hard landings hardly hurt it because it's made of resilient and repairable "Elapor" foam. Even after many crashes during the learning process, Easy Star will be ready for more where other trainers would be ready for the trash can. The motor and prop are mounted on top so hard landings won't break the prop. For 3 channel control: Rudder, Elevator, Motor control., Technical Specifications:, Length:, 35", Wingspan:, 54", Flying Weight:, 24 oz., Controls:, Elevator, Rudder, Throttle, Wing Area:, 370 sq. in.,
The beginner's RC airplane that can fly itself in a ...Hobby-Lobby
CHAMP RTF ULTRA-MICRO
| Wingspan | 22.4 in. (517mm) |
| Overall Length | 14.3 in. (365mm) |
| Flying Weight | 1.3 oz. (38g) |
The HobbyZone Champ is also equipped with the Spektrum 2.4GHz DSM2 advantage: The Champ's radio system uses the same Spektrum 2.4GHz DSM2 technology that is trusted by experienced RC pilots all around the world. With DSM2 technology you will enjoy complete freedom from signal interference whenever you fly., Champ RTF Highlights:, Everything you need to Teach Yourself to Fly in one box- even the batteries, Technical Specifications:, Champ RTF Specs:, Radio:, 4-channel 2.4 GHz Rx with Spektrum DSM2 3 channel receiver, CG (center of gravity):, Approximately 28mm from leading edge of the main wing, Prop Size:, 5.1 x 2.8 (130 x 70mm), Recommended Battery:, 3.7V 1S 150mAh LiPo (included), Charger:, DC 3.7V LiPo charger (included), Landing Gear:, Fixed main with steerable tail wheel,
The Champ takes the stress out of teaching yourself to ...HobbyKing
EXTRA 260 1372MM 40E CLASS 3D SCALE (ARF)
The classic lines and proven capability of the Extra 260 combine to make it one of the most popular aerobatic models, the Hobbyking Extra certainly looks the part and make no mistake, 3D flying is what this superb model is all about! The quality of this Extra is simply as good as it gets, the airframe has been constructed to keep the flying weight minimal but strong enough to take the punishment of extreme aerobatics, the superb quality covering has been expertly applied and for the final touch, the cowl, canopy and wheel pants are finished in a deep gloss paint. The hardware is excellent & also chosen to keep flying weight to an absolute minimum and of course the model features plug in wing & CF wing tube as you would expect for easy transportation. The H-King Extra 260 performs every inch as good as it looks, naturaly it makes for a great sport plane but it would be fair to say that hardcore 3D is what the Extra has been designed for. The precision of the airframe, stunning looks, top line quality and amazing feather weight specs make the Extra 260 a must have plane for all aerobatic and 3D pilots! Features:Classic looksTop quality construction and coveringEasy and fast to buildUltra light weight but strong airframeSuperbly applied, high quality coveringFull airfoil empenageBall link piano wire control rods & pull/pull rudderStunning 3D capabilityQuick field assembly, easy to transport Specs:Wingspan: 1372mmLength: 1240mmWing Area: 37dm2Dry Weight: 1100g (inc all hardware)Flying Weight: 2000g~2200g (Approx) Requires:Your own 4~6 Channel TX/RX42mm Brushless Outrunner Motor60A~80A ESC 4 x Digital High Torque Park~Std servo3300mAh~4500mAh 4s~5s Lipoly Battery50mm SpinnerUBEC,
5 Reviews
HobbyKing
F-TEK 31AP FLIGHT STABILIZATION CONTROLLER & F-TEK OSD COMBO
| Input voltage | 4.0 ~ 6.0V |
| Current draw | 50mA (5V) |
| Size | 47x27x20 mm |
| Weight (excluding wires) | 25g |
| Temperature range | -25 ° C ~ +70 ° C |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt |
| Current draw | 60mA (3.3V) |
| Size | 32x32x10mm |
| Weight (excluding wires) | 22g |
| Temperature range | -25 ° C ~ +70 ° C |
| http | //www.feiyu-tech.com/ |
Features:, • Level flight - When stabilization is activated, the F-TEK 31AP will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantageous as it makes flight easier and increases the student pilot's self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., F-TEK 31AP Specs:, F-TEK OSD Specs:, Package Includes:, F-TEK 31AP Flight Controller,
The F-TEK 31AP is an inertial attitude measurement instrument used ...5 Reviews
HobbyKing
F-TEK 30A FIXED WING FLIGHT STABILIZATION CONTROLLER (W/SELF-LEVELING)
| Features | • Easy installation |
| Working Voltage | 5~6V |
| Dimensions | 47x27x16mm |
| Weight | 23g |
| http | //www.feiyu-tech.com/ |
The F-TEK 30A offers three flight modes which can be remotely selected from an auxiliary transmitter channel in flight (3 position switch required to operate all 3 modes):, Auto-Stabilization Mode:, In this mode the F-TEK 30A will utilize the 3-axis accelerometer to self-level the aircraft when the flight sticks are at their neutral position. This is great for new pilot training and for aerial video/FPV platforms!, Standard Mode/3D Control Mode:, In this mode the device will utilize the 3-axis gyroscope to sense roll velocity and flight attitude. It will not self-level and will allow for more maneuverability for sport/3D flying., Deactivated Mode:, In this mode the device will not provide any stabilization and the model will fly as if there is no stabilization device connected., Specs:, Stabilization:, 3-axis gyro and 3-axis accelerometer, Flight Mode:, 3 selectable by transmitter, Includes:, F-TEK 30A Flight Controller,
F-TEK 30A is an inertial stabilization controller for your fixed ...5 Reviews
HobbyKing
DHC-2 BEAVER EP/GP .46 SIZE (KENMORE AIR) 1620MM (ARF)
The DH Beaver is without doubt one of the most widely know STOL "bush planes" and has become an aviation classic, good looking, powerful, tough and very capable, the Beaver was ideally suited to operating in the most hostile of conditions. As it could also be fitted with floats or skis, the Beaver became a hugely popular workhorse with both Civilian and Military Operators, despite a slow start, the Beaver became a huge sales success and ranks as one of Canada's most successful exports.This Beaver is modeled in the "Kenmore Air" scheme and has a superb, high detail scale finish. The airframe is nicely constructed and the covering expertly applied. This model features printed rivets and panel lines on the covering providing an ultra-realistic finish. This gives you a truly fantastic looking scale model that any pilot would be proud to own. With a 1620mm wingspan, the Beaver is a great size and has tons of presence both on the ground and in the air.This model can be finished in both electric or glow configuration. The windshield doubles as a removable magnetic battery hatch allowing for easy access to the inside of the model - perfect for accessing your flight battery when used in an electric configuration.The Beaver of course was famous for its superb STOL characteristics and this model is no exception. Landings are a breeze thanks to the large wing area and stable slow-flight characteristics. This fantastic looking DH Beaver is such a pleasure to fly and is very practical, the perfect every day model for even the most demanding RC scale pilots!Features:• High Level of Scale Detail • Beautifully Printed Scale Rivets and Panel Lines• Functional Cockpit Door• Nicely Finished Glass Fiber Cowl • Tough Under-Carriage and Steerable TailwheelSpecs: Wingspan: 1620mmLength: 1115mmFlying Weight: 2700~2800gIncludes:All HardwareInstrucionsRequires:Your Own 5~6 Channel TX/RX.46 Equivelent Brushless Outrunner Motor60A ESC w/BEC4~5 x Standard Size Servo3300~4000mAh 4s Lipoly Battery11x6~12x6 Propeller,
5 Reviews
ngHobbies
DRAGONOSD+ V2 COMBO
| Width | 29mm |
| Height | 12mm |
| Length | 50mm |
| Weight | 10 grams (OSD only) |
Display Features:, Voltage measurement:, 2 ports available, Current measurement:, 1 port available, GPS sensor provides:, Altitude, Ground speed, Coordinates, Number of satellites, Heading indicator, Home direction, LOS Distance, Distance to home, Barometric sensor provides:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, Compass:, Magnetic heading indicator, IMU:, Artificial Horizont, Other features:, Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, Alerts:, Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Wayppoints:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), This OSD package contains the following items:, Main DragonOSD+ V2 board, Dimensions:, , Documentation:, Click here, Connection schematics:, Click Here, Firmware upgrades and download PC software:, Click here,
New Generation Hobbies is happy to bring you the new, ...ngHobbies
12/5VOLT 2 CHANNEL MINI VIDEO SWITCH
| http | //www.vimeo.com/1049216 |
- Additional safety feature: In case the RC signal is lost, the device will switch back to Input 1 after about 2 seconds. The rationale behind this is the following: In case you have a forward and a backward facing camera, and you loose RC control while looking backwards, the device will switch back to the forward facing camera (assuming that this is connected to Input A) in order to allow you to look forward and resume flying the plane with forward view once you regain control. This feature is always useful to notify you that you are dangerously close to loose RC control of your plane., Demo Videos:, FPV Piloting with 2 Cams 1 Downlink, Manual:, Setup and Utilization Manual,
The universal version of the 2 Channel Video switch will ...ngHobbies
DRAGONOSD+ V2
| Width | 29mm |
| Height | 12mm |
| Length | 50mm |
| Weight | 10 grams (OSD only) |
Display Features:, Voltage measurement:, 2 ports available, Current measurement:, 1 port available, GPS sensor provides:, Altitude, Ground speed, Coordinates, Number of satellites, Heading indicator, Home direction, LOS Distance, Distance to home, Barometric sensor provides:, Altitude, Temperature, Variometer:, Airspeed, Vertical speed indicator, Compass:, Magnetic heading indicator, IMU:, Artificial Horizont, Other features:, Elapsed time, Callsign, RSSI, Flight summary, Various display modes, Remote OSD off, Configurable border area, Configuration:, On screen menu, Configure via stick input, Configure via PC, Customizable screen layout, Alerts:, Range, Altitude, Stall speed, Voltage, mAh, Audio notification, Lost signal, RSSI level, Integration:, Single servo wire link from the DragonLink for multi-channel auto-pilot, Logging:, Google Earth Logging, Autopilot:, RTH (Return to home), IMU fly-by-wire, Wayppoints:, 20 GPS way points configurable on the PC, Hardware:, PAL/NTSC auto-detect, GPS auto-detect, UART interfaces, I2C extension bus (various devices supported), This package contains the following items:, Main DragonOSD+ V2 board only, Dimensions:, , Documentation:, Click here, Connection schematics:, Click Here, Firmware upgrades and download PC software:, Click here,
New Generation Hobbies is happy to bring you the new, ...